Gideon™ | Built for the Toughest Slurries

Built for Abrasion. Trusted by Engineers.

Gideon™ is a heavy-duty pump range designed for demanding slurry and gravel handling applications. Built with robust construction, replaceable wear components, and application-specific impeller and sealing options.

From high-density slurries to large-solid gravel, Gideon™ pumps are engineered to provide efficient material handling, extended wear life, and simplified maintenance across mining, dredging, mineral processing, and other demanding industries.

Pump Construction

Built for Serviceability. Designed for Wear.

Gideon™ G-Series

Gideon™ S-Series

Built for Abrasion. Engineered for Endurance.

Gideon™ S-Series is a heavy-duty slurry pump designed for the continuous handling of highly abrasive, high-density slurries. Its robust construction, large flow passages, and replaceable wear components provide reliable performance, extended wear life, and reduced maintenance in demanding industrial environments.

Key Specifications

Discharge Size: DN25–DN450
Capacity: Up to 1,800 m³/h
Head: Up to 75 m
Maximum Operating Pressure: 10 bar / 16 bar
Pump Speed: 300–3,000 RPM
Fluid: High-Density Slurry
Viscosity: 0–2,000 cP
Operating Temperature: Up to 95°C
Impeller Type: Channel / Open
Casing: Ductile Iron
Wear Parts: Chromium Steel / Rubber
Impeller: Chromium Steel / Rubber
Shaft: SS420 / SS329
Seal Options: Expeller / Gland / Mechanical
Flange Standard: GB / PN16

Applications

Mill discharge, coarse sand, tailings, mineral concentration, heavy media, coal washing, FGD, chemical processing, bottom and fly ash handling, and metal smelting.

Gideon™ G-Series

Built for Large Solids. Engineered for Reliability.

Gideon™ G-Series is a heavy-duty gravel pump designed for continuously handling highly abrasive slurries containing large solids that conventional slurry pumps cannot accommodate. Its large-volume casing and oversized passages reduce internal velocities and wear, while the low NPSHr design provides reliable suction performance for demanding dredging and mining applications.

Key Specifications

Discharge Size: DN100–DN350
Capacity: Up to 3,600 m³/h
Head: Up to 70 m
Maximum Operating Pressure: 10 bar / 16 bar
Pump Speed: 300–3,000 RPM
Fluid: Gravel / Large-Solid Slurry
Viscosity: 0–2,000 cP
Operating Temperature: Up to 95°C
Impeller Type: Channel / Open
Casing: Ductile Iron
Wear Parts: Chromium Steel
Impeller: Chromium Steel
Shaft: SS420 / SS329
Seal Options: Expeller / Gland / Mechanical
Flange Standard: GB / PN16

Applications

Coarse sand, dredging, fine tailings, coal, sugar, paper & pulp, and mineral sands.

Seal Options

Reliable Sealing for Demanding Slurry Applications

Mechanical Seal

Designed to provide a highly controlled seal between rotating and stationary surfaces, minimizing leakage and protecting the pump from slurry ingress.

Gland Seal

A traditional packed sealing arrangement offering reliable performance with proper flushing, lubrication, and adjustment for demanding slurry applications.

Uses centrifugal force to reduce slurry pressure around the shaft, helping prevent slurry from reaching the primary sealing area without relying on mechanical contact.

Expeller Seal

Sizing Guide

Selecting the right Gideon™ pump starts with understanding its model code and key configuration parameters. Each model designation identifies the pump size, inlet and outlet dimensions, impeller diameter, and motor power, making pump selection simple and straightforward.

Model Breakdown: Gideon™ S200 150-500-260

S – Indicates the Gideon™ S-Series pump family

200 – Indicates the pump size / discharge outlet size: DN200
150 – Indicates the inlet size: DN150
500 – Indicates the nominal impeller diameter: approximately 500 mm
260 – Denotes the motor power: 260 kW

Next Innovation

Engineered for Impact. Built for Tomorrow.

GET IN TOUCH

NEWSLETTERS

Innovation@hanstens.com